en - Before using for the first time
Setting the clock format
The display will change to the screen for
setting the clock format.
Clock display
12 h
24 h
(
Use the and arrow buttons to select
the desired clock format, and confirm your
choice with the OK button.
Setting the time
The display will change to the screen for
setting the time of day.
Time of day
12
: 00
Use the arrow buttons (higher) and
(lower) to set the hours and minutes, and
confirm each entry with the OK button.
If you have selected 12 h for the clock
format, "am" (in the morning) or "pm" (in
the afternoon) will appear beside the time.
30
All manuals and user guides at all-guides.com
Setting the water hardness
The display will change to the screen for
setting the water hardness.
The commercial dishwasher must be pro-
grammed for the water hardness level in
your area.
Your local water authority will be able to
advise you of the water hardness level in
your area.
Where the water hardness fluctuates (e.g.
between 8 and 17 °dH), always pro-
gramme the dishwasher to the higher
value (17 °dH in this example).
In the event of a fault, it will help the service
technician if you know the hardness of your
local water supply.
Therefore, please enter the water hard-
ness:
____________________°dH
The dishwasher is programmed at the fact-
ory for a water hardness level of 3.4 mmol/l
(19 °dH – German scale).
Use the arrow buttons (higher) and
(lower) to set the water hardness level re-
quired and confirm your entry by pressing
the OK button.
See "Filling the container for dishwasher
salt" for more information about setting the
water hardness level.
Water hardness
°dH
19
(0 - 70 °dH)