en - Operation
Starting the programme
Press the Start/Stop button (the LED of
the Start/Stop button will light up).
Programme sequence indicator
After the start of a programme, the wash
phase description and, for 10 seconds,
gramme running
are shown in the display.
During the programme sequence, the and
arrow buttons can be used to switch
between the wash phase, the set temperat-
ure and the actual temperature in the
second line of the display.
The time remaining is shown in the third line
of the display.
Universal
Main wash
Duration
End of programme
After a programme has ended normally, the
Start/Stop button's LED will go out.
Programme finished
The message
pear in the bottom line of the display.
Universal
Temperature
Programme finished
In addition to this, a buzzer will sound for
approx. 3 seconds (factory default setting).
To completely finish the programme, the
door must be opened fully with the com-
mercial dishwasher still switched on.
If the switch-off function is enabled, the
commercial dishwasher switches itself off
after a short period of time.
Press the button to switch it on again.
Switching off
Press the button until the LED in the
button goes out.
38
All manuals and user guides at all-guides.com
Pro-
G
23
Min
will ap-
55 °C