Descargar Imprimir esta página

Fulgor Milano FCPO 6215 P TEM Instrucciones Para La Instalación Y Uso página 52

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 147
10 - System Setting
EN
With the oven on, select the icon
key
to enter the SETTINGS menu. This menu permits
setting a number of parameters or special functions. It also
permits accessing the error events list.
1. Press the keys
with the
key.
2. Use this menu to change the following settings:
Press the keys
be displayed from among the three available ones and
confirm with the
EVENT LOGS
MAIN VOLTAGE
DEMO
Event Log
The menu permits checking any recorded errors. These
codes can be notified to the after-sales service.
01 12/11/2015 07:06 CODE: F10305
02 17/11/2015 13:17 CODE: F10305
14
and confirm with the
to select the sub menu and confirm
SETUP
SERVICE
to select the item to be set or to
key.
SYSTEM
OM 15
EVENT LOGS
Demo
The purpose of this function is to set the DEMO mode,
which makes the oven useless for cooking but automatically
performs a demonstration of functions.
1. Press the keys
to select the item ON.
2. Confirm with the
key.
3. Press the
key.
After about 30 seconds, the oven starts to operate in this
mode.
To temporarily stop the DEMO function, simply keep any
key pressed for a few seconds until the oven switches to
standby. To start it again, press the
To disable the function, enter the DEMO display page and
set OFF. Confirm using the
NOTE Once set, the function remains enabled even if the
oven is disconnected from the power mains.
DEMO
key.
key.
ON

Publicidad

loading

Este manual también es adecuado para:

Fclpo 6215 p temFco 6214 p tem