ims PRO SPOT TRAFO 14500 Manual página 49

CONNEXION GYSPOT / C CLAMP :
B : Black G : Green
THE GYROSCOPE
Fix the gyroscope with 4 screws M5 x 12.
GYSPOT SOFTWARE ON PC
The purpose of this software is to edit and save the spot weld reports made using a GYSPOT equipped with an SD card reader. To use this software,
the PC must be equipped with an SD card reader.
The GYSPOT software can be installed from files on the SD card. In the directory \GYSPOT V X.XX, double click on the file INSTALL.EXE, and follow
the instructions to install the software on your PC. A GYSPOT icon is automatically installed on your PC desktop.
1 - Language selection
The software supports several languages. Currently, the available languages are:
French, English, German, Spanish, Dutch, Danish, Finnish, Italian, Swedish, Russian, Turkish.
To select a language, from the menu, click on Options and then on Languages.
Note that once the language has been selected, it is necessary to close and open the GYSPOT software again so that the language can be taken into
account.
2 - User identity
In order to personalise the editions with your personal information, some information is required. To give the required information, in the menu, click
on Options then on Identity. A new window appears with the following information:
Company name
Address / Post code / City
Telephone / Fax / Email / Website
Logo
The information will then be displayed on the editions.
SPOT TRAFO 14500
W : White Y : Yellow
It can rotate around the clamp at a 360° angle.
EN
49