Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING AND MAINTENANCE
Do not use abrasive cleaning agents or solvents.
1. Disconnect the mains plug from the mains socket.
2. Take out the food and store in a cool location.
3. Clean the appliance with a soft cloth, warm water and detergent.
4. Wipe the door seal with clear water only and then wipe dry thoroughly.
5. After cleaning reconnect and adjust the temperature control knob as desired.
6. Put the food back into the appliance.
BULB REPLACEMENT
• The LED lights in the fridge cannot be replaced by the user.
• If the LED lights stop working, please contact the local authorised service
agent.
CLEANING TIPS
• R
emove all shelves, door shelves, vegetable containers, removable accessories (such as egg tray
and ice cube tray if included) and/or drawers from the appliance. Wash them in warm soapy water
with a soft sponge. Rinse and dry thoroughly.
• W
ipe the interior parts (including door switch, temperature control knob and lamp cover) with a
damp cloth soaked in a mixture of warm water and dishwashing liquid. or stubborn stains, use baking
soda.
• W
ipe down the doors, including edges, with a microfiber cloth dampened with a mild dishwashing
liquid and water. se a wet sponge and soft brush (such as toothbrush) to remove any stuck-on food.
TROUBLESHOOTING
If there is a problem with your appliance, please check the following points before contacting customer service.
Problem
Appliance does not operate. No electricity at power outlet.
Cabinet not stable or level.
Noises
The appliance is defosting.
Temperature setting not correct.
Appliance not cool
Frequent door openings.
Large amount of food recently added.
Possible causes
Check that the plut is correctly connected and power switched on.
See installation section.
See temperature control section.
Minimise door openings to allow temperatures to stabilise..
Possible solution
47
Publicidad
