Publicidad
CLEANING SHEET IN COMPLIANCE WITH HACCP PROCEDURE
To clean it is advisable to use mild detergents and disinfectants that do not contain alkali (e.g. caustic soda), acidic or chlorinated compounds
(e.g. hypochlorite), or organic solvents (e.g. acetone, alcohol, ether).
Do not use abrasive cloths or metal sponges to remove dirt. Compound solutions must not be used.
Before using any product, read the technical sheet and the safety sheet indicated on the pack.
SURFACE
PRODUCT
CLEANING
Metal
Neutral or slightly
(steel, stainless
alkaline detergent
steel, anodised
aluminium)
DISINFECTING*
Plastic
(polyethylene)
Metal
(painted)
CLEANING
Neutral or slightly
alkaline detergent
DISINFECTING*
Transparent plastic
(Lexan, Plexiglas)
*Remember to read disinfectant product labels thoroughly, particularly checking that the following are stated on the label:
Disinfectant, Medical Surgical Device; Ministry of Health registration no.; the phrase "for use in the food industry"; doses and use times; composition, manufacturer, batch and production
date; warnings on safe use.
PRODUCT TYPE
Products made with anionic and non-ionic
surfactants, containing EDTA, sodium
silicate, synergists, suitably diluted in water.
90% biodegradable; with product pH in
water between 9 and 12.
Products containing quaternary ammonium
salts suitably diluted in water.
Products containing anionic and non-ionic
surfactants suitably diluted in water.
Products suitable for plastic, containing
quaternary ammonium salts suitably diluted
in water.
41
HOW IT WORKS
The surfactant dissolves dirt, which is
subsequently rinsed off with water.
The anti-bacterial action interferes with the
metabolic reactions of proteins and with the
permeability of the cell membranes.
They are incompatible with anionic
surfactants as they become ineffective
when mixed with them.
Do not mix quaternary ammonium
compounds with normal detergents.
The surfactant dissolves dirt, which is
subsequently rinsed off with water.
The anti-bacterial action interferes with the
metabolic reactions of proteins and with the
permeability of the cell membranes.
They are incompatible with anionic
surfactants as they become ineffective
when mixed with them.
Do not mix quaternary ammonium
compounds with normal detergents.
HOW TO APPLY
Apply the product using a soft sponge or a
nonwoven or microfibre cloth.
Leave for 5 minutes and rinse with water.
Apply or spray the product onto the surface
using a soft sponge or a paper yarn fabric
cloth.
Leave for 5 minutes and rinse with water.
Apply the product using a nonwoven or
microfibre cloth.
Leave for 5 minutes and rinse with water.
Apply the product using a nonwoven or
microfibre cloth.
Leave for 5 minutes and rinse with water.
FREQUENCY
CLEANING:
at the end of each
shift or according to
company HACCP
frequency
DISINFECTION:
daily
CLEANING:
at the end of each
shift or according to
company HACCP
frequency
DISINFECTION:
daily
SVT18-010AR rev 00-15-05-18
Publicidad
