Publicidad
Idiomas disponibles
Idiomas disponibles
connect a damaged appliance. Inform your retailer or point of sale of any
damage. In such a case, keep the packaging.
• It is recommended that the appliance be allowed to settle for at least 24
hours before connecting the electrical power supply, so that the compressor
fluid feed is correct.
• Proper air circulation is necessary to avoid overheating. To ensure sufficient
ventilation, observe the installation recommendations provided.
• In order to avoid fire risk, wherever possible, ensure that the appliance is not
in contact with walls or with any hot element (compressor, condenser).
Observe the installation recommendations.
• The appliance should not be placed close to radiators or cooking hot plates
or gas rings.
• Check that electrical sockets remain accessible when the appliance is
installed.
• When positioning the appliance, ensure the supply cord is not trapped
or damaged.
• Your device is not designed to be placed in a garage, basement, or
similar location.
Power saving
To limit the electricity consumption of your appliance:
✓ Install it in an appropriate place (see "Installation instructions").
✓ Leave the doors open as little time as possible.
✓ Regularly inspect the door seals and ensure that they are still closing
properly. If this is not the case, contact your after-sales service.
✓ Layout recommendations: The following layout of your appliance's
equipment (shelves, etc.) is recommended so that energy is used as
rationally as possible for the appliance.
33
Publicidad
