3. PRODUCT DESCRIPTION
Cabinet
1
2
Shelf
Control board
3
4
Adjustable feet
5
Sensor
6
Lower hinge
Door seal
7
8
Handle
9
Glass door with anti-UV
10
Upper hinge
treatment
Note: The appliance you buy might not be exactly the same as shown here.
To find out more about your product, consult the online EPREL database. As defined in Commission Delegated Regulation
(EU) 2019/2016, all information relating to this refrigeration appliance is available on the EPREL Base (European Product
Database for energy labeling). This database enables you to consult the information and technical documentation of your
refrigeration appliance. You can access the EPREL Database by scanning the QR code on the energy label of your appliance
or by going directly to: www.ec.europa.eu and searching the reference of your refrigeration appliance.
4. INSTALLATION INSTRUCTIONS
Before using this appliance
• Remove the exterior and interior packing.
• Before connecting the appliance to the power source, let it stand upright for approximately 24 hours. This will reduce the
possibility of a malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• When disposing your appliance, please choose an authorized disposal site.
• Place your wine cooler on a floor that is strong enough to support it when it is fully loaded. To level your Wine cooler, adjust
the front leveling leg at the bottom of the wine cooler.
• Adequate ventilation is required, do not block the front air outlet.
• Not designed for placement in adage or basement.
• The appliance is for indoor use only.
• This wine cellar is designed for
way
. For a good operation of the device it is imperative to leave a good air circulation all around the device. We do not
accept any liability for failure to comply with the installation instructions.
free-standing
, in no case it must be installed in a built-in or integrable
only
38