Coaguchek Vantus System Manual De Usuario página 45

Test
Reading strip...
Test
Insert code chip...
330
Test strip warming up...
CoaguChek Vantus System User's Manual, version 2.0
Test
Test
Apply blood
30
seconds remaining...
• The meter reads the strip information
(provided by the barcode on the test
strip) and checks if it matches code chip
information already stored in the meter.
• If you haven't inserted the code chip yet
or in case of a mismatch, you will be
prompted to insert the correct code chip.
• When the test strip check has been
completed successfully, the meter
indicates that the test strip is warming up.
• Once the warming-up process is complete,
the meter displays the test strip and blood
drop symbols. These symbols and a beep
tone (unless you have disabled the beeper
function) indicate that the meter is ready
to perform the test and is waiting for you
to apply blood.
At the same time, a 180-second countdown
begins. You must apply the drop of blood
to the test strip within this time, otherwise
you will receive an error message.
45