Wiesenfield WIE-ATV-120 Manual Del Usuario página 46

Machine tilt adjustment
Belt Tension Adjustment
WARNING!
Excessive tension on the belt may lead to premature failure of belt and drive
components. Excessive tension on the belt may also lead to a safety hazard to the
operator or bystanders.
The Belt tension should be checked after the first 20 hours of use and every 40 hours
thereafter.
1. Check belt tension by applying approximately 22 pounds of pressure halfway
between the pulleys. The belt should deflect approximately 3/8".
2. Belt tension can be adjusted at the belt tension bolt. Turn belt tension bolt until
desired belt tension is achieved.
3. Loosen gearbox mounting bolts and move gearbox1 until mower driveline is
running straight (parallel) with the Flail Mower.