Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1. Remove nut (#5), bolt (#4), and spacer (#1) for Stamping blade system or locknut
(#1), bolt (#3) for forged hammer system or nut 4), bolt (#1), and spacer (#2) for Y
type blade system.
2. Remove existing blades or turn existing pair of blade around 180 degrees and
reinstall.
3. Install blade with existing bolt, washers, and locknut.
4. Tighten locknut with correct torque.
Publicidad
Tabla de contenido
