Wiesenfield WIE-ATV-120 Manual Del Usuario página 47

Belt Tension Bolt
Cutting Height Adjustment
The machines cutting height depends upon the position of adjustment plate.
1. Remove bolts that fix the roller height on both sides.
2. Lift or lower both sides of roller in equal measurements.
3. Replace bolts and re-tighten to the proper torque.
Rotor blade Replacement
Frequently check rotor blades to make sure they are in good working condition and
properly secured to the rotor. Replace worn or damaged parts with new blades.
IMPORTANT:
Make sure that the replacement of blade with other same weight. This will be a
balance of rotor spinning.
IMPORTANT:
The replaced blade must be the original factory accessories.
The blade have a cutting edge on both the leading and trailing edges. When the
leading edge wears out, turn existing pair of blade around 180 degrees and reinstall.
Replaced blade should be the same length as existing part to maintain rotor balance.