Wiesenfield WIE-ATV-120 Manual Del Usuario página 50

3.4. Maintenance & Lubrication
Storage
It is good practice to clean off any dirt and grease that may have accumulated on the
mower and to inspect and make necessary repairs before parking the unit at the end
of the working season and for long periods. This will help ensure that the mower will
be ready for use the next time you hook-up to it.
DANGER!
Always disconnect main driveline from tractor PTO and secure mower in the up
position with solid supports before servicing underside of the mower.
1. Remove any dirt and grease that may have accumulated on the mower and moving
parts. Scrape off compacted dirt from under the hood and then wash the surface
thoroughly with a garden hose.
2. Check rotor blade and blade bolts for wear and replace if necessary. See section
"Rotor blade Replacement".
3. Inspect mower for loose, damaged, or worn parts and adjust or replace as needed.
4. Repaint parts where paint is worn or scratched to prevent rust.
5. Replace all damaged or missing labels.
6. A light coat of oil or grease may also be applied to areas where paint has worn off
to minimize oxidation.
7. Lubricate as noted under section "Lubrication Points".
8. Store equipment on a level surface in a clean, dry place. Inside storage will reduce
maintenance and make for a longer mower life. Ensure that the main frame is stable.
9. Store driveline end off the ground.