Publicidad
Idiomas disponibles
Idiomas disponibles
Installing the device
To install the device proceed as follows:
1. press the retaining hook (A) on the underside to disconnect the display from
the base
2. unscrew the terminal block cover, pass the wires for connection to the boiler
(or air conditioner) through the hole in the base and fix the latter to the wall
(or to cover the 3-module recessed box) using the supplied screws (B)
3. connect the relay to the boiler or air conditioner control circuit (C)
4. close the cover of the terminal block and tighten the sealing screw (D)
5. insert the batteries observing the correct polarity and taking care not to bend
the contact strips (E)
6. reposition the display on the base, first coupling the teeth on the upper side
and then the retaining hook of the lower side (F)
7. the display turns on: proceed with the device configuration
A
C
E
B
D
F
1
- 47 -
OB327000 Chronothermostat User Manual
1
2
click
Publicidad
