Publicidad
Idiomas disponibles
Idiomas disponibles
Modem Wi-Fi (NET)
The NET menu allows you to switch the modem on or off:
• NET ON = modem on, the device can connect to the home router
to be controlled remotely with the "TUO" app
• NET OFF = modem off, the device cannot be controlled remotely.
In this case it is possible to program the device only using the keypad.
To use the device as a normal chronothermostat without connection to the cloud, it is
advisable to turn off the modem to limit consumption and extend life of the batteries.
The subsequent reactivation of the modem can only be done from the keypad of the
device. In this case the device, if it had previously been connected to a Wi-Fi network,
attempts to connect to the Wi-Fi network with the previously saved parameters.
The
symbol on the home screen indicates the connection status:
• On fixed: modem on and device connected to the cloud
• Off: modem off
• Blinking: modem on and connection problem.
Field (14) indicates the cause:
- Lan: no connection to the Wi-Fi network.
If this condition persists, check that the router
is turned on and that the network parameters
have not been changed
- nEt: lack of internet access.
Check that the Wi-Fi network guarantees internet access
- CLd : failure to connect to the
Orbis Server. The problem resolves
itself once the connection between the
Orbis Server and the device is restored.
If this condition persists for more than 24 hours, do not carry out any
operation and contact Orbis assistance..
- CLd +
flashing: the device is no longer associated with any user
(see page 75)
- 68 -
OB327000 Chronothermostat User Manual
Publicidad
