Publicidad
Idiomas disponibles
Idiomas disponibles
WiFi menu
(active only with remote control enabled)
The signal strength (
FLd
only when the modem is turned on (NET = ON). To switch between
display, press the keys
• The signal strength indicates the quality of
the connection with the access point.
- values higher than -60dB: excellent signal quality
- values between -60dB and -90dB: good signal quality
- values below -90dB: poor signal quality which could
compromise communication between the device
and access point. In this case, move the device closer
to the access point
• The MAC address of the device is a sequence alphanumeric that uniquely identifies
a device within a network of devices.
Reading must be done from left to right by scrolling through the 2 dedicated pages
using the arrows (in the example: AA-F8-FA-C2-8d-7b).
) and the MAC address (
and
.
- 69 -
OB327000 Chronothermostat User Manual
) are information visible
Ac
and
FLd
Ac
Publicidad
