Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO DO IN CASE OF REPLACEMENT OF THE ACCESS POINT
In case of replacement of the router/access point of the home network, it is necessary
to connect the device to the new wi-fi network. Proceed as follows:
1. On Tuo Wi-Fi PILA:
a. Hold down the keys
" Conf
nEt"
2. On the app:
b. Choose "New Thermostat" → Tuo PILA → "Next"
c. Connect to the "iwm..." network generated by the device and follow the
instructions shown on the App. Wait for the device display show the icon
to indicate the successful connection between the app and the device.
d. Now choose (with Android) or enter (with iOS) the complete name of the Wi-Fi
network where connect the device and enter the password, be careful to digit
faithfully all characters (uppercase, lowercase, spaces, digits) that compose
them. Confirm to continue.
e. Exit the app without entering the name and PIN serial number.
HOW TO TRANSFER CONTROL OF THE DEVICE FROM ONE ACCOUNT
(USER) TO ANOTHER
If it is necessary to assign control of the device to another user (typical situation for
example when the device is installed in a rented house and the tenants change),
proceed as follows:
1. Disconnect the device from the old user (via one of the following two alternative
ways):
a. Access the Wi-Fi signal strength page (ADV →
while the
icon flashes, hold down the
the display shows "
b. On the old user's app, access the "Device list" page and hold down the icon
of the device to be deleted until the deletion confirmation request appears.
At the end of one of the two operations of deleting the device from your
account, the
icon will start flashing on the chronothermostat display
2. On the app of the new tenant:
perform the device configuration procedure with the new user account
(see pages 48-49).
and
simultaneously until the display shows
"
dEL
- 75 -
OB327000 Chronothermostat User Manual
menu, see page 69) and
FLd
and
keys for a long time until
Publicidad
