GYS toparc MT-125 Manual Del Usuario página 8

Never touch the live parts of the torch as it is connected to the cutting circuit.
Do not touch the torch and the ground clamp at the same time.
Always use dry, well-maintained clothing to isolate yourself from the cutting circuit. Wear insulating shoes, no matter where you work.
PRECAUTION FOR USE
Never wrap the cutting leads around your body.
Do not use the cables or torch to move the machine.
The torch must be fully uncoiled to prevent overheating.
Switch off the generator after the torch is cooled and before each maintenance and before replacing or control wearing parts.
Regularly check the condition of the torch. If damaged, the torch must be replaced.
GENERAL DESCRIPTION
SPECIFICATIONS
MT-125 torches are designed for manual PLASMA cutting.
AT-125 torches are designed for automated PLASMA cutting.
TECHNICAL SPECIFICATIONS
Compatible with cutting machines
Designation
Part number
Length
Starting voltage
Max allocated current
Duty cycle at 40°C
Type de gas
Torch cooling
Range of ambient temperature in cutting
Range of ambient temperature in transport or storage
Specifications of the switch (trigger)
Applied standard
COURANT
45A FINE CUT
45 A
65 A
85 A
105 A
125 A
CURRENT
85A - 125A
8
MT-125 / AT-125
100%
60%
CUTTING
Torch 6 m
5.0 bar - 220 l/min
5.0 bar – 215 l/min
5.0 bar – 220 l/min
5.0 bar – 250 l/min
5.0 bar – 285 l/min
5.5 bar – 305 l/min
GOUGING
Torch 6 m
4.0 bar
CUTTER 85A - NEOCUT 105 - CUTTER 125A
MT-125 - 6 m MT-125 - 12 m
039506 039513
6 m 12 m
-10 -> +40°C
-10 -> +55°C
0.5 A / 48 V DC
EN60974-7: 2013
Torch 12 m
5.6 bars - 220 l/min
5.6 bar – 215 l/min
5.6 bar – 220 l/min
5.6 bar – 250 l/min
5.6 bar – 285 l/min
6.2 bar – 305 l/min
Torch 12 m
4.5 bar
AT-125 - 6 m AT-125 - 12 m
038479 039520
6 m
500V max
125 A
100 A
125 A
air
air
EN
12 m