Publicidad
Idiomas disponibles
Idiomas disponibles
EN
COFFEE DOSE PROGRAMMING
Measures are always programmed using the same
button; any other buttons are ignored. The pro-
grammed amount of brewed coffee can be
changed by repeating the programming.
Place the mug/cup as shown (see
TION FOR COFFEE
Lift the capsule loading lever until it locks into po-
sition to open the pod fitting compartment.
Put a Lavazza capsule into the capsule fitting
compartment.
Lower the capsule loading lever to close the pod
fitting compartment.
10
PREPARING THE COFFEE
PREPARA-
BREWING).
Press and hold one of the two coffee delivery but-
tons. After about 3 seconds, the selected key will
flash and the coffee machine will enter the pro-
gramming mode.
Once the desired amount of coffee has been ob-
tained, stop supply by releasing the button.
If the programmed measure exceeds the maximum
allowed (220 ml-7,44 oz) the machine will automat-
ically stop delivery, the delivery button will blink and
the last programmed measure will be saved in the
memory. If there is a power failure during program-
ming, the last programmed value remains in the
memory. If during a dose programming, water lack is
indicated, the machine stops the supply and the
dose being programmed won't be saved. Once
filled the water tank, repeat the dose programming
procedure.
Publicidad
