Coffee Dose Programming - LAVAZZA Jolie Plus Instrucciones De Uso

COFFEE DOSE PROGRAMMING

Measures are always programmed using the same but-
ton; any other buttons are ignored. The programmed
amount of brewed coffee can be changed by repeating
the programming.
Lift the pod loading lever until it locks into position to
open the pod fitting compartment.
Put a pod into the pod fitting compartment.
Lower the pod loading lever to close the pod fitting
compartment.
PROGRAMMING THE MACCHINE
Press and hold one of the two coffee delivery buttons
for at least 3 seconds. The selected key will flash and
the coffee machine will enter the programming mode.
Once the desired amount of coffee has been obtained,
stop supply by releasing the button.
If the programmed measure exceeds the maximum al-
lowed (8,7 oz/250 cc) the machine will automatically
stop delivery, the delivery button will blink and the last
programmed measure will be saved in the memory.
If there is a power failure during programming, the last
programmed value remains in the memory. If during a
dose programming, water lack is indicated, the machine
stops the supply and the dose being programmed won't
be saved. Once filled the water tank, repeat the dose
programming procedure.
27
E N