Controllo Casa USBy Manual Del Usuario página 23

V : 6.1
ERSIONE
3. After entering your credentials (User & Password) you will see the following graphic
interface
At this point, after selecting "Temperature" you will see the following graphic interface of
the environment where your USBy device resides (see graph below)
2.2.5 Software update
Our customers will be notified via email when a software update is made available.
In this case, the email you will receive will contain the procedure to download and install
the new software version.
To update the USBy software, Windows Operating System shall be used!
2.2.6 Device reset (only for USBy v6 version)
The procedure for resetting the device is as follows:
1) Disconnect USBy from the power supply
2) Connect USBy to the power supply and disconnect it after 1 flash
www.ControlloCasa.it info@controllocasa.it
Page : 23/64
+39 06 94804820