Descargar Imprimir esta página

MBM PR7 T Serie Manual De Uso E Instalación página 26

Ocultar thumbs Ver también para PR7 T Serie:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 59
from the nominal voltage value ±
15% shown at the bottom of the
technical data table.
The appliance must be in-
cluded in an "Equipotential"
ground discharge system.
Drainage of the appliance
must be conveyed into the
grey water discharge net-
work in an open "glass" unsi-
phoned formation.
The appliance must only be
used for the purposes indicat-
ed. Any other use must be
considered
"IMPROPER"
therefore the manufacturer declines
all liability for any consequent dam-
age to persons or property.
Particular safety prescrip-
tions
tions-danger) are detailed in
the specific chapter concern-
ing these issues.
Do not obstruct the heat ex-
traction and/or dissipation
openings.
Do not leave flammable ob-
jects or material near the ap-
pliance.
gas - electrical) upstream the ap-
pliance whenever you need to
work in safe conditions.
Whenever it is necessary to
operate inside the appliance
(connections, commission-
ing, checking operations, etc.) pre-
pare for the necessary operations
(removal of panels, elimination of
electric-gas-power supply) in com-
pliance with the safety conditions.
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
GENERAL AND SAFETY INFORMATION
(obligation-prohibi-
Disconnect
supplies if pres-
ent (e.g. water -
DUTIES AND
TIONS REQUIRED OF OPE-
RATORS
Prohibition for the homogene-
ous operator to perform any
type of operation (mainte-
nance and/or other) without having
first read the entire documentation.
the qualified technical operator
who is authorised for: handling, in-
stallation and maintenance of the
appliance in question.
and
neric" operator (Operator with limi-
ted responsibilities and tasks).
Person authorised and employed
to operate the appliance with
guards active and capable of per-
forming routine maintenance (cle-
aning the appliance).
The operators who use the
appliance must be trained in
all aspects concerning its
functioning and safety features.
They must therefore interact using
appropriate methods and instru-
all
ments, complying with required
safety standards.
The "Generic" operator must
operate on the appliance af-
ter the technician has com-
pleted installation (transportation,
fixing electrical, water, gas and
drain connections).
WORK AREAS
AND HAZARDOUS ZONES /
To better define the scope of in-
tervention and the relevant work
zones, the following classification
is provided:
- 6 -
QUALIFICA-
The information con-
tained in this docu-
ment is for the use of
The
operating
structions have been
drawn up for the "Ge-
in-

Publicidad

loading