Safety Instructions - BRAND Transferpette S-8 Instrucciones De Manejo

Safety Instructions

Please read the following carefully!
This instrument may sometimes be used with hazardous materials, opera-
tions, and equipment. It is beyond the scope of this manual to address all
of the potential safety risks associated with its use in such applications.
It is the responsibility of the user of this pipette to consult and establish
appropriate safety and health practices and determine the applicability of
regulatory limitations prior to use.
1. Every user must read and understand this operating manual prior to
using the instrument and observe these instructions during use.
2. Follow general instructions for hazard prevention and safety instruc-
tions; e.g., wear protective clothing, eye protection and gloves.
When working with infectious or other hazardous samples, all
appropriate regulations and precautions must be followed.
3. Observe all specifications provided by reagent manufacturers.
4. Only use the instrument for pipetting liquids that conform to the
specifications defined in the limitations of use and operating limita-
tions. Observe operating exclusions (see page 32).
If in doubt, contact the manufacturer or supplier.
5. Always use the instrument in such a way that neither the user nor
any other person is endangered. Avoid splashes. Use only suitable
vessels.
6. Avoid touching the tip orifices when working with hazardous samples.
7. Never use force on the instrument!
8. Use only original spare parts. Do not attempt to make any techni-
cal alterations. Do not dismantle the instrument any further than is
described in the operating manual!
9. Before use check the instrument for visible damages. If there is a
sign of a potential malfunction (e.g., piston difficult to move, leakage),
immediately stop pipetting. Consult the 'Troubleshooting' section of
this manual (see page 50), and contact the manufacturer if needed.
31