pellenc EXCELION ALPHA Manual De Instrucciones página 68

5.6. ADJUSTING THE LENGTH OF THE STRIMMER WIRE
1. Start the tool.
2. Select speed 3 by pressing the on/off button on the
tool 3 times (all 3 LEDs should light up).
3. Tap the cutting head on the ground.
The cutting head plate in the protective guard automati-
cally cuts the strimmer wire to the correct length.
Warning
The strimmer wire cutting plate does
not cut the wire in speed 1.
Select speed 2 or 3.
5.7. STRIMMING TECHNIQUES
5.7.1. BASIC MOWING/STRIMMING
1. Define a strip that covers the width of the work area.
68
GRASS STRIMMER EXCELION ALPHA
53_144013_C