BirdBike VA00038 Manual Del Usuario página 11

6 Attach the pedals
Wrench Pedal
Install the left and right pedals by screwing them into the crank.
Pay attention to which pedal is being installed on the left and
the right as the left pedal is reverse threaded so it is tightened
counter-clockwise. You can tell the two pedals apart by looking
for the "R" on the right pedal and "L" on the left.
After the pedals are screwed on by hand, use the 15mm end of
the wrench to give the pedals a final tightening.
1 1