BirdBike VA00038 Manual Del Usuario página 12

7 Install the display
2.5 mm Allen key
For the final step before powering on your BirdBike, reinstall the display back into the
handlebar so that the Bird logo is at the bottom. Be sure to not pinch the cable inside of
the handlebar while reinstalling. Once reinstalled, use the 2.5mm Allen key to replace and
tighten the screw under the display so that it's tightened into place inside of the handlebar.
Connect the one end of the power cable coming from the bottom of the display to the other
end of the power cable that is coming out of the bottom of the frame. At this point you can
power on your BirdBike, but be sure to read through the rest of this manual before riding.
A - F R A M E