BirdBike VA00038 Manual Del Usuario página 9

4 Attach the front fender
Attach the front fender to the fork by using the screws that are already in the fork legs.
Use the 4mm end of the tool to remove the two screws from the fork legs and then
tighten the screws through the holes at the end of the fender mounts.
Using the 4mm end of the tool remove the screw that's on the top of the backside of
the fork and tighten the screw through the fender mount bracket on top of the fender
so that it's secured tightly to the back of the fork.
When tightening the fender, avoid
rubbing the tool on the frame so
the paint doesn't get scratched.
Also, don't over tighten the screws
to avoid stripping the holes.
Y-wrench
9