BirdBike VA00038 Manual Del Usuario página 15

S E T T I N G S M O D E
To enter Settings Mode first power on the
BirdBike, then long press and hold
keys +/- at the same time. Once in Settings
Mode you adjust from mph to km/h, set a
speed limit, set wheel diameter, and adjust
the brightness of the display.
While in Settings Mode, you can toggle up
and down with the up
(-) buttons. Short press the
button to adjust the ítem you want to
change, then short press the power button
after making your selection to save.
To exit Settings Mode just long press the
- button for 2 seconds. Also, while in
Settings Mode if no operation is performed
for 30 seconds, then the display will return
back to normal.
(+) and down
power
M P H & K M / H ( P 1 )
When P1 is displayed in the speed position
while in Settings Mode, press the
+/- buttons to switch the display between
mph or km/h. After selecting, short press
the power button to save.
S P E E D L I M I T ( P 2 )
When P2 is displayed in the speed position
while in Settings Mode and the speed limit
value is displayed in the trip position, you
can then adjust the speed limit with the
+/- buttons. The minimum is 7 mph
(12km/h) and the maximum is 20mph
(32km/h). After selecting, short press the
power button to save.
1 5