Thermador Professional Serie Guia De Instalacion página 21

chimney extension must be calculated.
→ "Calculating the optional chimney extension height",
Page 13
From inside of hood, screw the supplied ⅝" (16 mm)
2.
sheet metal screws through the holes on each side and
along the front into bottom of the extension, as shown
below. The quantity of screws is dependent on the hood
size.
Installing the telescopic chimney extension
Requirement: IMPORTANT: Secure the chimney hood to
the wall after installing the extension mounting bracket, but
before installing the telescoping chimney extension.
See"Hanging the chimney wall hood" beforesecuring the
actual extension. → Page 15
Ensure that the minimum height of 30" (762 mm) from
1.
the bottom of the hood to the cooking surface will be
maintained.
→ "Calculating the optional chimney extension height",
Page 13
Locate two studs at the mounting location.
2.
At the wall stud locations, measure 1¼" (32 mm) down
3.
from the ceiling to the middle of the bracket.
Mount the bracket at the wall stud locations using two
4.
(2) 1½" (38 mm) screws (provided). Ensure that the
bracket is level.
Installation en-us
21