R
The groove faces down
6. Fasten one Drawer Back Panel (P) between the Drawer Side Panels (Q and R) with four 32 mm Screws
(12). Make sure that the Drawer Bottom Panel (T) fits securely into the groove of the Drawer Back
Panel (P). Tighten the screws with a Phillips screwdriver.
7. Insert two 32 mm Screws (12) through the Drawer Back Panel (P) and screw into the Drawer Bottom
Support (S).
8. Repeat the previous steps to assemble an additional drawer assembly.
9. Securely screw the Cam Bolts (2) into the designated small holes on the Panels (I, K, L and N) using a
Phillips screwdriver.
Drawer Assembling
P
S
I
K
Q
12
R
L
11
12
12
P
S
x 2
2
N
Q