Publicidad
Idiomas disponibles
Idiomas disponibles
8 9
7
The middle rail is
located at inner side
28. Ask for assistance to lift the assembled unit upright. DO NOT lean the desk by the legs.
29. Orient and attach the Return Support Frame (Z) to the Desk Support Frame (V) with two 32 mm Bolts
(7) and two Washers (8 and 9).
30. Attach the Short Stretcher (B1) to the Corner Side Frame (X) with two 15 mm Bolts (6) and two
Washers (8 and 9).
31. Repeat the same process to attach the Right Side Frame (A1) at the opposite end.
32. Position the assembled return top onto the Return Support Frame (Z) making sure that the pilot holes
underneath the Return Bottom Panel (J) overlap the through holes on the Return Support Frame
properly.
33. Insert two 32 mm Bolts (7) with the Washers (8 and 9) through the Return Left Side Panel (L) and
securely screw into the Desk Right Front Panel (H).
Assembly Instructions
A1
7 8
9
I
A
V
H
Z
B1
A
H
Z
20
X
6 8 9
Publicidad
