Publicidad
Idiomas disponibles
Idiomas disponibles
Lid fin slot on the cooker handle can
hold the open lid on either left or right.
BEFORE THE FIRST USE
Before the first use, please take out all accessories from the package and read this manual carefully.
Please pay particular attention to operational instructions and cautions to avoid any injury or property
damage. Please wash the inside of the lid and the inner pot with warm soapy water, rinse and dry
thoroughly. Wipe the outer housing with a clean damp cloth. Never immerse the cooker housing in
water or any other liquid. The inner pot, sealing ring and steam release handle and all accessories are
dishwasher safe. But never clean the lid and housing in a dishwasher.
Install the Condensation Collector
To install the condensation collector, slide it into the slot on the cooker housing. Follow the reverse
order to remove it for cleaning.
Remove and Install the Sealing Ring
The sealing ring can be removed by pulling upwards (check the below picture and pull up). To re-
install the sealing ring, pressing it down into the lid rest (check the below picture and press down).
The sealing ring can be installed on either side facing up.
Please note the following:
•
Prior to each use, inspect to make sure the sealing ring is well seated in the sealing ring rack.
A properly seated sealing ring can be shifted, with a bit of effort, clockwise or anti-clockwise
follow the sealing ring rack shifted.
•
After use, remove any foreign objects from the sealing ring.
•
Keep the sealing ring clean to avoid odour. Washing the sealing ring in warm soapy water or
Condensation collector.
- 6 -
Publicidad
