Tool Kit; Changing The Oil - Jacto PJM-20 Manual Del Operador

(2) Maintenance of these items must be carried out by your authorized technical assistance except if you have the required tools and
mechanical expertise.
(3) For commercial use, log the operating hours to determine the proper maintenance intervals.
(4) After starting the engine, check for leaks in the agrochemical solution pump.
(5) Turn the two grease cups and give two full turns every 2 hours of operation.
(6) When the grease cups are empty, refill them with pump grease.

12.1. Tool Kit

The tool kit provided with the sprayer is essential to carry out periodical maintenance repairs or adjustments.

12.2. Changing the oil

Drain the oil while the engine is still hot for a quick and complete draining.
a. Place the sprayer on a level surface with the engine off.
b. Check if the fuel tank cap is firmly tightened.
c. Remove the oil filler cap and drain the oil in the oil container by tilting the engine towards the oil filler neck.
d. Refill with recommended oil until the maximum fill line. Add engine oil slowly to avoid overflowing as the oil tank capacity is
small.
OIL TANK CAPACITY: 80ml
Oil filler neck
3-mm Allen wrench
4-mm Allen wrench
17/10 wrench
Candle wrench
Maximum fill line
115/127