Publicidad
Idiomas disponibles
Idiomas disponibles
Oil Fill Cap & Dipstick
Now that you have set up your tiller for operation, get acquainted with its controls and
features. These are described on the next two pages and illustrated on this page. This
knowledge will allow you to use your new equipment to its fullest potential.
The operation of any tiller can result in foreign objects being thrown into
the eyes, which can damage your eyes severely. Always wear safety glasses
during operation or while performing any adjustments or repairs.
Recoil starter handle
This handle is used to start the engine.
Throttle control
The throttle control is located on the side of the engine. It regulates the spread of
the engine and will shut off the engine when moved into the STOP position.
Craftsman Snow Throwers conform to the safety standard of the American National Standards Institute (ANSI).
Air Filter
Fuel Cap
Tiller Tines
WARNING
Meets ANSI Safety Standards
OPERATION
Handle
Muffler
Figure 11
Choke control
The choke control is found on the side of the engine and is activated by moving the
lever to the CHOKE position. Activating the choke control closes the choke plate on
the carburetor and aids in starting the engine.
Air filter
The air filter is a device on the engine air intake that prevents dust and dirt entering
the engine. See Figure 11.
Muffler
Engine exhaust exits the engine via the muffler. See Figure 11.
Depth stake
The depth stake controls the tilling depth. See Figure 11.
10
Forward Tine Engagement Lever
Handle Height Adjustment
Depth Stake
Publicidad
