Dräger X-plore 8000 Manual Del Usuario página 6

en |
Description
3.2 Components
3.2.1 Blower unit
Illustration on the fold-out page (Figure B)
1 Tube connection
2 Control panel
3 Suction inlet
4 Splash guard cover
5 Respiratory filter (not enclosed with blower unit)
6 Respiratory filter lock button
Illustration on the fold-out page (Figure C)
1 Carrying system socket
2 Name plate
3 Carrying system lock button
4 Battery lock button
5 Rechargeable battery (not enclosed with blower unit)
Illustration of the control panel on the fold-out page (Figure D)
1 Rechargeable battery status indicator
2 Residual particle filter capacity indicator
3 On/off button
4 Flow indicator
5 Reduce flow
6 Increase flow
Display on control panel
Indicator
Segments light up in green.
Segments light up in green.
Segments light up in green.
Segments blink yellow or red. Fault (see chapter
6
Meaning
Residual battery capacity
depending on number of dis-
played segments:
> 75 % (4 segments)
> 50 % (3 segments)
> 25 % (2 segments)
< 25 % (1 segment)
Residual capacity of particle
1)
filter depending on number
of displayed segments:
> 75 % (4 segments)
> 50 % (3 segments)
> 25 % (2 segments)
< 25 % (1 segment)
Flow intensity depending on
number of displayed seg-
ments:
high flow (3 segments)
medium flow (2 segments)
low flow (1 segment)
5 Troubleshooting)
1) The residual capacity of the gas cartridge or the gas cartridge compo-
nents of the combination filter cannot be indicated.
Warning devices
The blower unit displays malfunctions with segments flashing
red or yellow on the control panel. The blower unit will also
trigger a sound and vibration alarm.
Depending on the thickness and material of the clothing,
the vibration alarm might not be perceived.
3.2.2 Filters and facepieces
Filters and facepieces are described in separate instructions
for use.
Half masks/full facepieces and hood/helmet/protective visor
have different flow ranges. The blower unit automatically
detects the breathing connection type and automatically
selects the appropriate flow range.
3.2.3 Breathing hoses
The following breathing hoses are available:
– standard hose
– flexible hose for increased comfort
Both breathing hoses are available for each of the following
facepiece types:
– Plug-in connector (for hoods, helmet/hood combinations,
bump cap/hood combination, helmets with visors)
– Bayonet-type connector (for helmets and protective
visors)
– Round-thread connector (for half masks and full
facepieces)
3.2.4 Carrying systems
Illustration on the fold-out page (Figure E)
1 Connection plate
2 Webbing
3 Clips on ends of the belt
4 Buckle
The following carrying systems are available:
– Standard belt
The standard belt consists of a textile webbing and press
studs to attach comfortable padding.
– Decontaminable belt
The decontaminable belt has a smooth plastic webbing
and is particularly recommended for decontamination.
– Welding belt
For the welding belt, the webbing is made of leather. The
welding belt is intended for use when welding.
Instructions for use
®
|
Dräger X-plore 8000