cecotec CLEANFRY 3000 Manual De Instrucciones página 7

SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
Make sure that the mains voltage matches the voltage stated
on the rating label of the appliance and that the wall outlet is
grounded.
Check the power cord regularly for visible damage. If the cord is
damaged, it must be replaced by the official Technical Support
Service of Cecotec in order to avoid any type of danger.
Always operate and store the appliance on a flat, stable surface.
Make sure the product's handles are properly assembled and
locked in place before use.
Never use the deep fryer without oil or fat because this could
damage the unit.
Hot steam is released during frying. Keep a safe distance away
from the steam to avoid burns and other injuries.
The appliance is not intended to be operated by means of an
external timer or a separate remote-control system.
Always make sure the product's inner pot is correctly installed
before operating the device.
The surfaces of the appliance become hot during and after
operation. Do not touch while in use. Allow the appliance to
cool at least 30 minutes before handling and use only heat-
resistant tools. Do not use metal tools as they may become hot.
Always unplug the appliance while not in use, before cleaning
and before carrying out maintenance tasks.
The use of accessories or parts not provided or recommended
by Cecotec may result in fire, electric shock or injuries to
persons and to the product.
Do not let the power cord hang over the edge of table or
countertop or touch hot surfaces.
CLEANFRY 3000 / 3000 BLACK / 3000 FULL INOX 7