Descargar Imprimir esta página

Porsche E-Performance Standhalterung Manual De Instalación página 21

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 25
Electrical connection
Incorrectly installed
DANGER
electrical components
Incorrectly installed electrical components can lead
to electric shock, short circuit, explosion and fire.
▶ Electrical components may only be installed and
brought into operation by a qualified electrician.
▶ Observe the applicable standards, regulations
governing electrical installations, fire safety
measures and accident prevention regulations.
This includes ensuring the correct wire cross-
section, and connecting the socket via a separately
fused power circuit.
▶ Only operate the Porsche Mobile Charger in
correctly earthed power supply systems.
Operation in unearthed systems (e.g. IT systems)
is not permitted.
▶ Protect sockets and plug connections from
moisture, water and other liquids.
▶ Do not use damaged components. Isolate them
via the pre-fuse and secure so they cannot
inadvertently be switched back on.
▶ Also pay attention to the Porsche vehicle
and charging equipment manuals.
Instructions for electrical
connection
When the high-voltage battery is being charged
via the industrial socket/mains outlet, the electrical
installation may be loaded to its maximum capacity.
To ensure uninterrupted charging, follow the recom-
mendations and instructions in the manuals of your
Mobile Charger Connect and charging dock.
Connecting the infrastructure
socket
Risk of electric shock
DANGER
If the laid power cable is live, touching it will cause
an electric shock that can result in severe injury
or death.
▶ Switch off with the pre-fuse and secure so it
cannot inadvertently be switched back on.
▶ Only lay cables that are not live.
1. Connect the cable
to the infrastructure
socket.
Electrical connection
Fitting the charging dock
1. Remove the screws
securing the mount-
ing panel. Hold the
panel in place while
you do this!
2. Screw the charging
dock and mounting
panel onto the fasten-
ing points (3x) on the
pedestal provided for
this purpose.
The charging dock is
now fitted and your
Porsche Mobile
Charger Connect can
now be installed and
connected by an elec-
trician. For this work,
pay attention to the
installation instruc-
tions in your charger's
manual.
DE
EN
ES
FR
IT
JP
KO
NL
PTB
RU
ZH
ZHT
21

Publicidad

loading

Este manual también es adecuado para:

971 044 030