Selco Quasar 150 Instrucciones De Uso página 26

8 TECHNICAL SPECIFICATIONS
Power supply voltage U1 (50/60Hz)
*
Zmax (@PCC)
Slow blow line fuse
Communication bus
Maximum input power (kVA)
Maximum input power (kW)
Power factor PF
Efficiency (μ)
Cosϕ
Max. input current I1max
Effective current I1eff
Duty factor (40°C)
(MMA)
(x=30%)
(x=60%)
(x=100%)
(TIG)
(x=35%)
(x=60%)
(x=100%)
Adjustment range I2
Open circuit voltage Uo
IP Protection rating
Insulation class
Dimensions (lxdxh)
Weight
Manufacturing Standards
Power supply cable
Length of power supply cable
*
This equipment complies with EN/IEC 61000-3-11 if the maximum permissible mains impedance at the interface point to the public grid
(point of common coupling, PCC) is smaller than or equal to the Zmax stated value. If it is connected to a public low voltage system, it is
the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment may be connected.
*
This equipment does not comply with EN/IEC 61000-3-12. If it is connected to a public low voltage system, it is the responsibility of the
installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the equipment may be
connected. (Consult the "Electromagnetic fields & interferences" - " EMC equipment classification in accordance with EN/IEC 60974-10" section).
26
QUASAR 150
1x230V±15%
244mΩ
16A
ANALOG
7.5kVA
4.7kW
0.63
83%
0.99
33A
18.1A
150A
120A
100A
150A
130A
100A
5-150A
78Vdc
IP23S
H
280x110x220 mm
4.1 kg.
EN 60974-1/EN 60974-10
3x1.5 mm2
2 m