AERMEC RePuro 100 Manual De Uso página 32

5.7. ENTERING THE PASSWORD PROTECTED MENU (Password 000)
The RePuro unit has several password protected operator parameters. The password avoids accidental modification of these parameters which are:
- Operating season (parameter code SEA)
- Heating operating setpoint (parameter code SPH)
- Cooling operating setpoint (parameter code SPC)
- The cleaning time (parameter code CT)
- Bypass freecooling setpoint (parameter code BPF)
The procedures for setting each of these parameters will be explained in the following paragraphs. In order to see or modify these parameters it is first
necessary to enter the password menu.
To enter the password menu it is necessary to follow the procedure detailed in paragraph 11.4, then pressing the MODE/SELECT key allows the pass-
word value to be inserted (this value is 000). A further press of the MODE/SELECT key confirms the value, which if correctly inserted allows access to
the protected parameters.
1
Password menu:
2
The disappearance of the SET icon shows that the
system is awaiting insertion of the password (de-
fault value of 000)
3
Once in the password menu the first operating pa-
rameter (SEA) will be displayed.
WARNING: Once in the password protected
menu pressing the navigation keys (
) permits moving between the various pa-
rameters. If during the display of the SEA pa-
rameter the ( ) key is pressed this exits the
password menu and to return to the password
menu it is necessary to repeat the procedure
detailed in this page.
32
1811 - 4238020_01
1
Activate password modification
mode
Below is the sequence of parameters contained in the protected
password menu:
Main menu
,
2
Set password value
Password menu:
SEASON parameter:
HEATING SETPOINT parameter:
COOLING SETPOINT parameter
CLEANING TIME parameter:
BY-PASS parameter:
3
Confirm password value