Roborock Dyad Pro Manual Del Usuario página 12

Connecting to the App
1. Download the App.
Search "Roborock" in the App Store or Google Play or scan the
QR code below to download and install the app.
2. Reset WiFi.
a. Keep the machine upright and press
and enter standby mode.
b. Press and hold and
voice alert. The reset is complete when the WiFi indicator
flashes slowly. The vacuum cleaner will then wait for a
connection.
Press and hold the
buttons simultaneously
to light up the screen
until you hear the "Resetting WiFi"
Note: If the mobile phone fails to connect to the vacuum cleaner because your router
configuration has changed or you forget your password or for any other reasons, reset WiFi
and add your device again.
3. Add the Device.
On the Roborock App, tap "+" on the home page, and add the
device as instructed in the app.
Notes:
• The actual process may vary due to ongoing app updates. Follow the instructions provided
in the app.
• Only 2.4 GHz WiFi is supported.
• If the vacuum cleaner waits more than half an hour for a connection, WiFi will be
automatically disabled. If you want to reconnect, reset the WiFi before proceeding.
11
WiFi Indicator
• Off: WiFi disabled
• Flashing slowly: Waiting for connection
• Flashing quickly: Connecting
• Steady on: WiFi connected