Roborock Dyad Pro Manual Del Usuario página 18

Routine Maintenance
To maintain optimal performance of the product, refer to the
following table for routine maintenance.
Maintenance
Parts
Frequency
Roller 2–4 weeks
Filter 1 month
Cleaning head and
1 month
dirty water pipe
Dirty tank 1 month
Dirty water level
1 month
sensor
Charging dock tray As needed
Charging contact 1 month
Product Maintenance
If this product is left unused for a prolonged period of time,
fully charge it and unplug it before storing it in a cool and dry
place. Do not place the product in humid locations or under
direct sunlight. Charge it at least once every 3 months to avoid
overdischarge.
Cleaning the Body
Wipe and clean the body with a soft and dry cloth. Before cleaning,
unplug the power supply and keep the vacuum cleaner off.
Cleaning the Dirty Tank and Filter
1. Take out the dirty tank, pull out the cover, and open the water
Replacement
Frequency
6–12 months
6–12 months
N/A
N/A
N/A
N/A
N/A
2. Take out the filter from dirty water tank cover and remove any
17
level sensors. Clean the parts with the provided maintenance
brush, rinse them with cold water, and then snap the water
level sensors back in place.
Water Level Sensors
trash attached to the filter. If the filter is dirty, rinse it with cold
water and then shake off the residual water.