Roborock Dyad Pro Manual Del Usuario página 13

Instructions for Use
Filling the Clean Tank
1. Push the Clean Tank Release and remove the tank.
2. Open the plug, fill it with tap water, and then close it tightly. The
water level should not exceed the MAX line.
3. Reinstall the Clean Tank bottom first then push forward to
secure it in place.
Note: To avoid deforming the Clean Tank, only use cold water.
Adding Detergent
1. Push the detergent cartridge release button and remove the
cartridge.
2. Open the detergent cartridge, fill it with detergent, and then
close it tightly.
3. Reinstall the detergent cartridge.
Notes:
• The detergent cartridge requires refilling after about 20 tanks of clean water.
• Remove the detergent cartridge if it is deemed unnecessary.
• To prevent corrosion or damage, only use detergent recommended by Roborock.
12