Roborock Dyad Pro Manual Del Usuario página 20

Routine Maintenance
7. To install the front rollers, marked red and blue, on the correct
sides of the head. Pinch them with both hands and align them
with the front roller shaft. Push inward to install properly.
Red
Cleaning the Cleaning Head and Dirty
Water Pipe
1. Remove the dirty tank and front and rear rollers. Switch it off
and stabilize the body.
2. Clean the roller slots and dirty water pipe with the maintenance
brush provided.
3. Wipe the charging contacts with a dry cloth.
4. Reinstall the rollers and dirty tank in place.
Note: Do not wash the cleaning head directly with water.
Charging Contacts
Cleaning the Charging Dock Tray
1. Grasp the side handles of the tray and pull upward.
2. Rinse the tray with water and reinstall it in place after drying.
Note: Only remove and wash the tray. Do not wash any other parts of the charging dock.
19