Publicidad
Step 2: Connect the cables
Take out a router from HUAWEI WiFi Mesh 3, connect it to the
optical/broadband/cable modem using a network cable, then
connect it to a power supply.
Optical/broadband/cable modem
(from your broadband provider)
POWER
RESET
LA N
Internet
ADSL
• If the indicator is steady red, this indicates that the router is not
connected to the Internet. Please refer to "Step 3: Set up the router".
• For routers that support WAN/LAN auto-adaptation, the network ports
are WAN/LAN combo ports. You can also specify a fixed WAN port
on the router's web-based management page.
Step 3: Set up the router
Method 1: Configure the router on the app
1
Connect your mobile phone to the Wi-Fi
connected to the modem (no password required). Check for
the Wi-Fi name on the bottom of the router.
WiFi
Connected
Insert the cable to the WAN/LAN
auto-adaptation port on the router
LAN
WiFi
WAN
®
Wi-Fi Name: XXXXXX
17
Router
POWER
of the router
Publicidad
