BFT TIR 60 - 120 Instrucciones De Uso página 14

ENGLISH
20) NOISE
The environmental noise produced by the gear-motor in normal operation
conditions is constant and does not exceed 70 dB (A).
21) ACCESSORIES
SM1 External unlocking to assemble to the existing cremone bolt of the
overhead door (fig. 22).
SET/S External unlocking with receding handle for sectional doors max.
50mm (fig. 23).
PT1 1 m extension for garage doors up to 3.50m (fig. 24).
APT Extension and bracket attachments for spaced or close to ceiling
assembly (fig. 25).
ST
Automatic unlocking of bolts for spring overhead doors. Applied
to the control arm, it unhooks the side bolts of the door automa-
tically (fig. 26).
22) SCRAPPING
Warning! This operation should only be carried out by qualified personnel.
Materials must be disposed of in conformity with the current regulations.
In case of scrapping, the automation devices do not entail any particular risks
or danger. In case of materials to be recycled, these should be sorted out by
type (electrical components, copper, aluminium, plastic etc.).
23) DISMANTLING
Warning! This operation should only be carried out by qualified personnel.
When the automation system is disassembled to be reassembled on another
site, proceed as follows:
• Disconnect the power supply and the entire external electrical installa-
tion.
• In the case where some of the components cannot be removed or are
damaged, they must be replaced.
The descriptions and illustrations contained in the present manual are
not binding. The Company reserves the right to make any alterations
deemed appropriate for the technical, manufacturing and commercial
improvement of the product, while leaving the essential product fea-
tures unchanged, at any time and without undertaking to update the
present publication.
14 -
TIR 60-120 - Ver. 05
INSTALLATION MANUAL