Publicidad
Idiomas disponibles
Idiomas disponibles
4. Device overview
4.1. PALLET TRUCK
8
7
6
5
1 Control lever
2 Load forks
3 Load rollers
4 Castors
4.2. NAMEPLATE
Is located behind the tiller.
Displays the maximum load capacity and the dimensions of the lifting forks.
It may not be removed or covered.
If it is damaged or becomes very dirty, fit a new nameplate. Contact the Hoffmann Group Cus-
tomer Service.
5. Transport and storage
Immediately on receipt check the product for damage in transport. Damaged products must not
be installed or commissioned.
Specifically check the following components for damage:
1× pin
2× retaining pin
1× tiller
1× pre-assembled load forks with hydraulic pump
Before further transport remove the load, move the load forks to the bottom position and secure
them with lashing straps. The maximum uphill or downhill gradient must not exceed 2 %.
1
www.hoffmann-group.com
2
4
5 Adjustment screw
6 Foot pedal
7 Oil reservoir for hydraulic pump
8 Tiller
17
en
3
Publicidad
