Publicidad
Idiomas disponibles
Idiomas disponibles
22
9.1. TOPPING UP OIL
1. Pull the control lever up and fully lower the load forks.
2. Turn the tiller to the left.
en
3. Remove the oil filler plug from the oil reservoir.
4. Fill with oil (vacuum pump oil ISO VG32) up to the lower edge of the thread.
NOTICE! The oil reservoir has a maximum capacity volume of 0.3 litre.
5. Close the oil reservoir using the oil filler plug.
9.2. CHANGING THE OIL
1. Pull the control lever up and fully lower the load forks.
2. Turn the tiller to the left.
3. Remain the drain plug from the oil reservoir, and drain the oil.
4. Screw in the drain plug and remove the oil filler plug.
5. Fill with 0.3 litres of fresh oil (vacuum pump oil ISO VG32) up to the lower edge of the thread.
6. Close the oil reservoir using the oil filler plug.
7. Dispose of the oil in accordance with the applicable national regulations.
10. Cleaning
Remove soiling with lukewarm water and mild soap solution. Do not use alcoholic, abrasive or
solvent-based cleaning agents. Do not clean using water jet or high-pressure cleaner.
11. Technical data
Length×width
Fork length
Fork width
Lift range
Volume of the oil reservoir
Rated load capacity
Weight
12. Spare parts
Order original spare parts from the Hoffmann Group Customer Service.
13. Disposal
Comply with the national and regional environmental protection and disposal regulations for cor-
rect disposal or recycling. Segregate items into metals, non-metals, composite materials and con-
sumables and dispose of them responsibly. Re-use is preferable to recycling. Contact Hoffmann
Group customer service.
1540 × 540 mm
1150 mm
160 mm
85 – 115 mm
0.3 l
2500 kg
68 kg
Instruction manual
Publicidad
