cecotec BOLERO DRESSCODE 7000 D Manual De Instrucciones página 11

- Do not remove the filter from the drain pump while there is
water left in the machine. Hot water spillage may occur.
- Before carrying out any maintenance in the device, unplug
the appliance from the mains.
- As a safety measure, we advise you to unplug the appliance
and cut the water supply after every use. Maximum water-
inlet pressure: 1 MPa. Minimum water-inlet pressure: 0.05
MPa.
- Use the new hoses supplied with the equipment.
- Never unplug the appliance with wet hands.
- Unplug the power cord before cleaning or repairing the
product.
- For safety reasons, the appliance must be properly earthed.
- Water channelling and electrical devices must be connected
by a qualified technician in accordance with the local and
national safety regulations specified by the manufacturer.
- The glass door may reach high temperatures during
operation. Keep children and pets away from the glass door.
- Do not use the device in rooms where water, moisture,
explosives, or caustic gases are present.
- If the room where the washing machine is located has
any type of device that generates fumes from the burning
of fuels, make sure that there is proper ventilation, as the
accumulation of these fumes may cause a fire hazard.
- Do not wash items that have been soiled with substances
such as cooking oil, acetone, alcohol, petrol, kerosene, spot
removers, turpentine, waxes, and wax removers.
- Items such as foam rubber, shower caps, waterproof textiles,
rubber backed articles, and clothes, or pillows fitted with
foam rubber pads should not be washed in the machine.
- Fabric softeners or similar products should be used as
specified by manufacturer.
BOLERO DRESSCODE 7000 D - 7000 STEEL D
11