cecotec BOLERO DRESSCODE 7000 D Manual De Instrucciones página 84

ENGLISH
Indicator or display does
not light
Abnormal noise.
Errors
Error
E30
E10
E21
E12
EXX
7. TECHNICAL SPECIFICATIONS
You can find more information on this model by scanning the QR code on the energy label.
Product
Reference:
84
BOLERO DRESSCODE 7000 D - 7000 STEEL D
The PCB is disconnected, or
the system connector has
connection problems
Cause
The door is not closed
properly
Water injecting problem while
washing
Overtime water draining
Water overflow
Other models
Bolero DressCode 7000 D
02717
Check for power supply.
If the problem persists,
contact the official Technical
Support Service of Cecotec.
Check if the fixing bolts have
been removed.
Make sure the appliance is
installed on a solid, level
floor.
Level the washing machine
adjusting its feet.
Solution
Restart after the door is closed.
Check if there is laundry or dirt stuck.
Check if the water pressure is too low.
Stretch the water supply hose.
Check if the inlet valve filter is blocked.
Clean the filters.
Check if the drainpipe is blocked.
Remove any type of object or dirt
which may block the water outlet.
Check there are no blockages in the
water supply and/or drain hoses.
Restart the appliance.
Contact the official Technical Support
Service of Cecotec.
Bolero DressCode 7000 Steel D
02682