Garant XCONTROL 359400 Manual De Instrucciones página 49

4.2. NAMEPLATE
1
2
4
5
6
1 Manufacturer
2 Address
3 Protection class
4 Product number
5. Product description
The XControl is for determining tool lengths and for breakage monitoring in machining centres or milling machines.
6. Commissioning
6.1. AVAILABLE COMBINATIONS
1 XControl + XConnect
2 XControl + XControl + XConnect
6.2. INSERTING THE BATTERY
A
NOTICE! When inserting the battery, do not operate the contact point.
ü XControl is unpacked.
1. Loosen and remove screws.
2. Remove battery compartment cover (4).
3. Insert the battery into the battery compartment.
» Observe the polarity of the battery.
4. Place the battery compartment cover (4) onto the housing and align.
5. Insert screws.
6. Tighten screws for battery compartment cover with 1.2 Nm.
» Battery is inserted.
6.3. CONNECTING XCONTROL + XCONNECT
B
1. NOTICE! Observe uppercase and lowercase spelling.
2. NOTICE! Settings of CONFIG.TXT file must be configured on a separate computer.
3
7 8
5 Serial number
6 Country of manufacture
7 Marking
8 Disposal
www.hoffmann-group.com
de
bg
da
en
fi
fr
it
hr
lt
nl
no
pl
pt
ro
sv
sk
sl
es
cs
hu
49